TapeMeasure's Parts
3D models of parts and accessories for TapeMeasure
When designing Payload for TapeMearsure, it is recommended to look at Boson Dynamics's documentation on Mounting Rails
If designing equipment to be secured between both rails hole center spacing should be 160mm.

TapeMeasure's Universal Mounting Plate
Specs (Measure the pockets to make sure nuts & bolts will fit) 

 

 Nut & Bolt- 1/4” - 20 

 Mounting point spacing 20 mm 

 x27 Mounting points 

 Plate’s mounting point x6 160mm (aligned for Spot’s T-slots) 

 Overall Dimensions 180mm x 100 x 10mm 

 

 Models are available under attachments to the left to with the link below  

 Mounting Plate on Printables 

 Additional accessories 

 

 Print settings 

 When slicing the model make sure to have a layer pause before the pockets are sealed to place 1/4-20 bolts. Spot Universal Mounting Plate.3mf should have a layer pause set when using PrusaSlicer and the file is "opened as project". 

 

   

 Photos of accessories 

  

Tail Project
Documentation for Tapemeasure's Tail Project

Speaker Project
Documentations and CAD files for Speaker Box made for Tapemeasure

Speaker Clip
Speaker Clip is designed for a sound speaker to mount with a t-slot system. The file is available with an attachment to the left. 

 

 SpeakerMountpartFemale.stl and SpeakerMountpartmale.stl works together to hold sound speaker to Tapemeasure.

Speaker Box 2023
The speaker was made in two parts and mount two: 

   

 Files are available with the Attachments to the left