Tape Measure Basic Step Up - SDK File & Virtualenv

This setup guide is for Windows 10/11 users only!

System Requirements:

• Must have any python version above 3.6 (3.8 recommended).
  • No python? No problem! Download it here.

• You also must have a python code editor such as Virtual Studio Code (my choice but up to you).
  • Download VS Code here. Make sure you install the one for your OS.

  • Please be sure to install the python extension.

*Click on the extensions button

*Type “python” into the search bar and it should be the first option by Microsoft

Spot SDK File:

• Open Command Prompt and paste in the command:
  • git clone https://github.com/boston-dynamics/spot-sdk.git

• This should automatically install and unzip the Spot SDK

• If this doesn't work there is a manual way to do it further down.

*Should look like this:

• After that we need to open the SDK as a workspace in Vs Code.
  • (Skip this and do your own thing if you’re using a different software).

• To do this we need to locate the spot-sdk file. It will be located at were ever you indicated before the git clone command. In this example case it’s located in drive C -> folder user -> Caicheng Li; giving you the address: C:\Users\Caicheng Li.

• Left click on the file and there should be an option to “Open with Code”

• If your on windows 11 you have to click on “show more options”

*Should look something like this:

After opening It should look something like this, with the contents of the folder on either the left-left or right-hand side of the window.

• This is how you will access the spot-sdk (more on why it’s important in a later doc)

If this for some reason does not work for you, you can manually install it by going here.

*Click on the green “Code” button

*Then click Download ZIP

*After it finishes downloading, right-click on the folder in your download and click on extract all

*Open the extracted folder and right-click it to “Open with Code.”

*It should look something like this, with the contents of the folder on either the left- or right-hand side of the window.

• This is how you will access the spot-sdk (more on why it’s important in a later doc)

Pip Installation:

• Open command prompt again.

• To check if you have pip installed use the command:
  • py.exe -3 -m pip --version

For Windows 11 users:

• If you’re on windows 11 use the command:
  • python.exe -m pip --version

  • Pip comes preinstalled with python 3.4 and above so you should be good.

• It should always return a pip version number such as 19.2.1 (Version doesn't matter).

• If it pops up with nothing or an error contact one of the leads.

Virtualenv

• ProgramThis willis bethe usedprogram later,you'll butrun it’commands in so it's stillimportant!
good too have.
• Open up command prompt again and paste in:
  • py.exe -3 -m pip install virtualenv

• Then paste:
  • py.exe -3 -m virtualenv my_spot_env

• Then:
  • .\my_spot_env\Scripts\activate.bat

For Windows 11 users:

• If your on windows 11 paste in:
  • python.exe -m pip install virtualenv

• Then:
  • python.exe -m virtualenv my_spot_env

• Then:
  • .\my_spot_env\Scripts\activate.bat

*Should look like something like this:

• To go out of the virtual environment type in:
  • deactivate

• This should get rid of “(my_spot_env)”

Spot Packages

• Make sure youryou're NOT in the virtual environment.

• Paste in the command:
  • python.exe -m pip install --upgrade bosdyn-client bosdyn-mission bosdyn-choreography-client

• To verify you’ve installed correctly type in:
  • python.exe -m pip list --format=columns | findstr bosdyn

*Should look something like this:

• Next go into your python terminal by typing
  •  python.exe

• Then paste:
  • import bosdyn.client

• Then:
  • help(bosdyn.client)

*Should look like this:

After this you're all set up! If you run into any trouble while setting up contact @Cai or @Dwight Howard, II on Discord.=